Dash Series Rule Book

DNQ Dash Series

• Weight: 390 lbs
• 5 lbs post-race allowance
• Tires
• Left Side: Hoosier Treaded 11 x 5.5 x 6, D30
• Right Side: Hoosier Treaded 11 x 5.5 x 6, D30
• Engine: Stock 212cc Predator Engine
• Dash Series karts must have
• Rotor guard (if run behind the seat)
• LR bumper cover
• Safety equipment may be reviewed by the series. The series may determine a driver to be in an unsafe environment and may mandate changes before racing.

Wheel Offset

• Measured with the outside of the wheel & tire pointed at the ground.
• Straight edge placed on the top of the wheel measuring downward.
• Wheel height off the ground: 6 1/2" to 7 1/2"
• Wheel center height off the ground: 4"–5"

Body Panel Extensions / Hoses / etc.

• Body panel extensions may be used.
• Panels may not be higher than the driver’s shoulders.
• Panels must have rounded edges.
• Hoses may be run with fans to the clutch pull cord etc.
• Fans may be used for cooling or “downforce”.
• Ratcheting hubs are legal and may be used.

Spotters

• Spotters are allowed; however, spotters must be able to hear race control in order to relay messages from the tower.